First-Time Use
Operation and Setting
First-Time Use
- Retrieve the USB charging cable from the carton, and connect it to the lateral side wooden base of WHISPER. A short “beep” is emitted when connected.
- Touch the left and right button “< >” located at the base, and select settings on the display panel. -> Press the “－” button to confirm setting.
Operation and Setting
- Light Control -
-
1.A short “beep” emitted from WHISPER once connected indicates successful connection.
-
2.Touch the circular “brightness control button” located on the base to adjust ->
(1) Short Press: 3-level adjustment
(2) Long Press: stepless adjustment
- Time Setting -
-
1.A short “beep” emitted from WHISPER once connected indicates successful connection.
2.Touch the “< >” left and right buttons at the base, and select “00:00” as indicated on the display panel. -> Press the “－” select button on the right to enter time setting.
-
3.Touch the “< >” left and right buttons at the base, and select “12HR” or “24HR” as indicated on the display panel. -> Press the “－” select button on the right to confirm on the hour system.
-
4.Touch the “< >” left and right buttons at the base, and select “SET” as indicated on the display panel.
-> Press the “－” select button on the right.
-> Press the “< >” left and right buttons to adjust the time.
-> Press the “－” select button on the right to complete the time setting.Press the “－” select button on the right.
-> Press the “< >” left and right buttons to adjust the time.Press the “－” select button on the right to complete the time setting.
- Alarm Setting -
-
1.A short “beep” emitted from WHISPER once connected indicates successful connection.
2.Touch the “< >” left and right buttons at the base, and select “(( 🔔 ))” as indicated on the display panel. -> Press the “－” select button on the right to enter alarm setting.
-
3.Touch the “< >” left and right buttons at the base, and select “🔔 Light” and “🔔 No Light”. -> Press the “－” select button on the right to confirm on the sound and light mode.
-
4.Display panel is indicated with “00:00”. -> Touch the “< >” left and right buttons to adjust the time. -> Press the “－” select button on the right to complete the alarm setting.
-
5.Display panel is indicated with “-“and “+”. -> Touch the “< >” left and right buttons to adjust the volume. -> Press the “－” select button on the right to complete the alarm volume setting.
-
6.The indicator light on the right will flash orange after alarm setting iscomplete.
- Sleep Mode Setting -
-
1.A short “beep” emitted from WHISPER once connected indicates successful connection.
2.Touch the “< >” left and right buttons at the base, and select “zzZ” as indicated on the display panel. -> Press the “－” select button on the right to enter sleep mode setting.
-
3.Touch the “< >” left and right buttons, and select “zz30” or “zz60” on the display panel. -> Press the “－” select button on the right to confirm on the countdown time.
- Volume Setting -
-
1.A short “beep” emitted from WHISPER once connected indicates successful connection.
2.Touch the “< >” left and right buttons at the base, and select “VOL” as indicated on the display panel. -> Press the “－” select button on the right to enter volume setting.
-
3.Touch the “< >” left and right buttons at the base to increase and decrease the volume. -> Press the “－” select button on the right to confirm on the volume.
- Healing Sound Setting -
-
1.A short “beep” emitted from WHISPER once connected indicates successful connection.
2.Touch the “< >” left and right buttons at the base, and select “🎵🎵” as indicated on the display panel. -> Press the “－” select button on the right to enter healing sound setting.
-
3.Touch the “< >” left and right buttons at the base, and select “🎵1”, “🎵2”, or “🎵3”. -> Press the “－” select button on the right to confirm on the healing sound.
